Latex Mattress Foundation Description
The best foundation for a latex mattress is the Versi-Flex, by Coverest, the original state-of-the-art knock down latex mattress foundation that is simple to move in and out of your house, and stronger than the conventional models. Using industry standard 8-inch height, it is made from solid Canadian Spruce, requires only 6 carriage bolts at each end, and can be completely assembled in less than 10 minutes. With the simplistic one-of-a-kind design, the entire latex mattress foundation fits in a box that measures only 80" x 10" x 10" and ships via Fedex nationwide.
Benefits:
* 10 minutes approximate assembly time
* No additional tools required
* Ships via Fedex or similar carrier
* Easy to disassemble and store
* Can transport in a minivan or SUV
* Fits into attics, lofts or town homes
* High quality wood (spruce not pine) means better performance and durability
Assembling the latex mattress foundation is easy:
Step 1 is connecting the side rails. Lay the side rails and one end beam on the floor. Line-up both side rails with the channels on the end beam. Insert the bolts through the hols on both corners of the end beam and tighten.
Step 2 is placing the center rail through the middle of the end beam. (There are no bolts necessary to secure this rail to the end beam.) Then insert two bolts through the holes found on both outside corners of the end beam and tighten.
Step 3 is positioning the slats. Simply place the roll of slats on the top of the wooden structure at one end. Set the first slat behind the peg and unroll the slats across the top of the foundation. Set the last slat behind the other peg. (You may have to pull tight to get the slats snug).
Step 4, the final step, is putting the cover on the foundation. Slip the cover over the corner edges of the foundation with the fabric out. Lift the foundation onto it's side and pull the draw string tight.
